RE/MAX Elite

Replace Your Toilet in 3 Simple Steps

by Deborah Tomczak 08/30/2020

Photo by Edgardo Lagmay on Unsplash

Nothing dates a bathroom like an old toilet. Not only have toilets advanced significantly in the past 10-15 years. Older toilets often develop hard water stains and porcelain scratches that show their age.

Fortunately, replacing a toilet is one of the most straightforward home improvement projects you can do. And it's relatively inexpensive for a DIY toilet replacement. Here's how it's done.

What You'll Need

  • A new toilet. *Pro tip* Read reviews and find one with the feature you like. Toilets are similar sizes, but you should measure from the wall to the bolt to ensure the bolts are in the right place for your new toilet.
  • Rubber work gloves
  • Putty knife
  • Sponge
  • Hacksaw 
  • Wrenches
  • Towel
  • Nuts/Bolts
  • Closet flange
  • Washers
  • Wax ring
  • Garbage bag
  • Some of these items will come with a toilet. So see what's in the box before you buy separately.

    Remove the Old Toilet

    Before you do, turn off the water supply on the wall behind the toilet. Flush the toilet to empty the remaining water. Then while wearing gloves, use your sponge and towel to sop up any liquid left behind in the bowl and the tank behind the bowl.

    If the toilet's tank can separate from the bowl, remove it first for a lighter lift. You only need the hack saw if the bolts are rusted solid. Otherwise, you just need a wrench. 

    Put the dirty toilet in a big plastic bag and take it outside for now.

    Remove Old Wax

    Stick an old hand towel gently into the mouth of the hole left behind to block sewer gasses floating into your house. *Pro tip* Don't use a washcloth. You may lose it. If it falls down your drain, you may need a plumber to get it out.

    Next, use your putty knife to carve out the old wax around the hole in the floor. It's soft, so this is easy on the hands, but it may take a little while to dig it all out.

    Remove the old closet bolts and the flange if needed. They're cheap to replace.

    Install the New Flange, Bolts & Wax Ring

    Lay down your new flange and place your bolts pointing up. These will secure the base of your toilet. Tightening down washers over the bolts holds the bolts in place, so it will be easier to slide your toilet over the top.

    Next, soften the wax ring with warm water. And then fit it around the drain on the underside of the toilet. Don't forget to remove the towel from the pipe before going further.

    Lower Your Toilet into Place

    Carefully lower the bowl of the toilet over the bolts. Press down firmly to strengthen the wax seal. Then fasten the bolts on the bowl and tank. Hook up the water, tighten, and watch as the tank fills ready to shut it off the hose leaks. Tighten it.

    And you've just replaced your toilet. Don't forget to follow our blog for more helpful home tips.

    About the Author
    Author

    Deborah Tomczak

    Hello, my name is Deborah Tomczak, One of the Top Selling Real Estate Agents on the Space Coast working with Remax/Elite. 

    I specialize in the business of pairing discerning buyers with homes that match their wants and needs, and maximizing profits for people with real estate to sell. My commitment to you is that I will make sure you are communicated with during the entire process to reduce stress and ensure a positive outcome. 

    I bring a 25 year corporate career in marketing and advertising to my 19 year real estate business, allowing me to utilize skills and experience to make the best use my clients time and minimize unforeseen challenges that may arise.  

    I'd be honored to put my real estate experience to work for you.